What is included in the complete set of accessories for the marking machine?
The laser marking machine has its snare accessories. Don’t you know if you only have a laser marking machine? If you haven’t used it before, you can still say, today, what is included in the complete set of accessories of the fiber laser marking machine? Let everyone know more about it.
1. Optical fiber laser marking machine cabinet: also called laser marking machine cabinet, laser control cabinet. If a marking machine is compared to a house, then the cabinet is the frame of the house, and all other accessories are installed in this house.
2. Red light indicator: also called red light pen, used to indicate the light path, because the 1064nm laser is invisible, and the 650nm light indicated by the red light is visible. The 650nm light is visible through the beam combiner. It coincides with the light of 1064nm, so where the light of 650nm is pointed, where is the light of 1064nm, it achieves the function of indicating the light path. The red light pen is installed in the red light beam combining frame.
3. Field lens: also called plan focusing lens, scanning lens, F-θ lens. It is mainly used to focus the light from the galvanometer on a plane. At the time of purchase, you should pay attention to the marking range, and determine it according to your own needs. Don’t blindly ask for it. The wavelength of the optical fiber marking machine and the semiconductor marking machine are both 1064nm, and the field lens is generally universal. But sometimes if you use the original imported Scanlab galvanometer, its field lens connection ring may not be M85 * 1, and the field lens is generally M85 * 1 thread. At this time, a field lens conversion is required. Connect the circle.
4. Galvanometer: The galvanometer of the optical fiber marking machine is generally a digital galvanometer with a 10mm spot. Of course, some people use analog galvanometer alone. Generally these people are earlier customers, and they sell scanlab 10 The galvanometer used in most fiber marking machines is digital galvanometer. The digital galvanometer is actually not much different from the analog galvanometer. It is an analog galvanometer plus a DA, so that the signal is transmitted. Generally, the optical fiber marking machine uses the USB marking card, and the digital galvanometer must be USBUSB digital marking. Card, analog galvanometer must be USB. There are many fiber optic galvanometers on the market. The imported galvanometers mainly include: scanlab, raylase, GSI, CTI, etc. The domestic ones include: Century Sunny, Jinhaichuang, Hanzu, Canada Wotek, Hezoli, Qin Long, Lecan, GM, Century Tuotian, No. 1 in the list, Shengketai, Jianlong, etc. Many domestic galvanometer manufacturers are making scanlab-like galvanometers. In fact, these galvanometers just choose some better motors and add a shell like scanlab, so that they become high-fake scanlab. The specific quality depends on the parameters such as speed, temperature drift, accuracy, and warranty.
5. Marking card: also called laser control card, laser marking card. Common marking cards include Golden Orange, samlight, Century Sunny, Zhongweixing, Taiwan Xingcheng 502B marking card, etc. He is usually the Golden Orange USB marking card of choice for optical fiber marking machines, USB marking In the case of card points, the text patterns drawn in the computer are converted into analog signals or digital signals, and then transmitted to the galvanometer. It is USB analog marking card and USB digital marking card. The USB analog marking card is matched with the analog galvanometer, and the UISB digital marking card is matched with the digital galvanometer. Now there are two types of USB marking cards on the market: genuine and imitation. In terms of performance, the original and imitation versions are similar; in terms of quality assurance, most imitation and original versions have a one-year warranty, and some imitation versions have a two-year warranty. For example, in terms of price, the original and imitation versions are incomparable. However, the imitation version also has several features. Many imitation versions have low software versions, only up to 2.5.3, and some imitations can reach 2.7.6.
6, beam combiner: also called beam combiner. The role of the beam combiner: used to indicate the light path. Because the 1064nm laser is invisible, and in the actual marking process, we often need to know that the laser focus point is passing through the beam combiner. We use the visible 650nm red light emitted by the diode to act on the beam combiner. Next, combine with the 1064nm laser into a beam of light, one of the positions, so as to determine whether the marking position is correct. In this way, the position pointed by the 650nm red light is the position of the 1064nm laser, so as to achieve the purpose of using the 650nm red light to indicate the 1064nm laser.
7. Fiber laser: It is the component that generates laser light, and it is also the core part of the entire fiber laser marking machine. There are many brands. At this stage, the most common imported brands we see are: German IPG, British SPI, French manlight, French QUANTEL laser and other brands. Common Chinese-made fiber lasers are: Ruike, Chuangxin, Jeput, Onner, Jitai Waiting for manufacturers. For the time being, Ruike was the first in China, which is relatively mature. For equipment manufacturers, it is worthwhile to sell optical fiber marking machines from China, while for terminal users, it is worthwhile to buy optical fiber marking machines from Germany. why? From the perspective of cost performance, the price and price of lasers in China are compared with those of other countries’ lasers and the three can be compared. For different objects, different lasers will be selected.
